The Ebac CD425 dehumidifier is an industrial dehumidifier for environmental control of very large areas in addition to areas affected by severe conditions. Warehouses, factories, offices, and other large scale facilities with temperatures between 33 and 95 degrees can eliminate moisture and condensation issues without needing to depend on taxing the permanent and very expensive HVAC systems.
| PARAMETERS | STAR RATING |
| 1. Room Coverage Based on 24 Hour Moisture Removal |  |
| 2. Noise Level |  |
| 3. Low Temperature Operation | |
| 4. Quality of the Continuous Drainage Option Included (Ease of hose attachment, location above the ground to improve the flow of water w/ gravity and provides the hose) | |
| 5. Bucket Capacity | Not Applicable |
| 6. Size, Weight and Maneuverability |  |
| 7. Ease of Access to Bucket & to Remove and Replace | Not Applicable |
| 8. Energy Rating | |
| 9. Ability to Access Filter & to Remove, Clean and Re-install | Not Applicable |
| 10. Quality of Construction & Warranty | |
| 11. Value for the Price | |
Pluses:
- Very large water removal capacity: this is a true drying machine for large-scale areas up to 10,000 square feet – removes up to 285 pints per day and 50 gallons in extreme conditions
- Automatic humidity control: adjustable humidistat controls the level of dryness desired
- Powerful: with 4 horsepower and 1750 cfm, this dehumidifier puts out the power equivalent to 2 ½ Ebac CD100 units
- Durable in harsh environments: dehumidifier has a welded steel chassis with baked epoxy and scratch resistant vinyl coatings
- Low temperature operation: hot gas defrost is a great feature of these Ebac dehumidifiers, and particularly important in cold basements or unheated areas that require constant dehumidification; without a defrost feature, dehumidifiers can shut off for long periods of time
- Simple operation: thanks to easy to check system lamps that offer operation status “at a glance” to make sure dehumidifier is running smoothly
Minuses:
- Very large and heavy at 353 pounds
- Not energy efficient – uses 16 amps per hour and requires 220 Volt hookup (similar to a standard dryer hookup) however it still removes 3.2 pints per kilowatt hour of electricity used as a result of the 11.9 pints per hour of water it can remove
Summary:
The Ebac CD425 Dehumidifier is a rugged “stand-alone” unit that can handle the extra load encountered in a typical humid industrial setting. It may be heavy and big in size but the CD425 is definitely powerful and efficient enough for controlling the humidity in large open areas. Features such as 285 pint water removal capacity, humidistat control, system indicator lamps, ductability, hot gas defrost, a rugged exterior, and low temperature operation make this dehumidifier an excellent choice for industrial dehumidification needs. Of course, one would expect that with a dehumidifier this powerful it would use a lot of electricity and although the CD425 is no exception it makes up for it with the very large amounts of water it can pull from the air. Furthermore, at 353 pounds it is a machine that you will decide on once where to locate it and set it up and not want to be moving it around. Regardless, these things can be overlooked when one considers why to purchase a dehumidifier like this in the first place, which is the fastest and greatest moisture removal one can hope for from a single unit.
Links: Ebac CD425 Dehumidifiers | Ebac Dehumidifiers | Low Temperature Dehumidifiers | Commercial Dehumidifiers